CA414 Microphone Phase Calibrator

Introduction:

CA414 microphone phase calibrator is a multi-channel phase calibrator developed by BSWA TECH. It has built-in low-distortion loudspeaker which can form a uniform and stable plane wave sound field inside with the use of BSWA TECH’s power amplifier. It’s suitable for microphone phase difference measurement, microphone array selection and so on.

CA414 includes sound source, microphone holder (with 4 microphone mounting holes) and a strong sound-absorbing end. It can compare phase of four 1/2-inch or 1/4-inch microphones at the same time.

CA414 is only a sound source and comparison coupler. Therefore, perform phase measurement need additional signal generator, power amplifier and acoustic measurement system.

Features:

Phase test frequency range up to 6300Hz

Supports up to 4 microphone calibration

Suitable for standard 1/2-inch and 1/4-inch measurement microphone

Modular design, microphone holder is removable and expandable

The sound-absorbing end is made of BASF sound-absorbing foam

Built-in 4-inch loudspeaker, 8Ω, 15W

Application:

Microphone phase difference measurement

Microphone array selection

Sound intensity residual index measurement


Technical Parameters :

Specification
Frequency Range ±0.5° (50Hz~1000Hz);±1.0° (1000Hz~4000Hz);±2.0° (4000Hz~6300Hz)
Rated Power 15W
Rated Impedance
Input Connector BNC
Calibrator Size (mm) W240 x H666 x D240
Package Size (mm) W784 x H306 x D286
Weight 3.5kg (without package), 13.9kg (with package)
Applicable Microphone 1/2-inch and 1/4-inch measurement microphone
Internal Sound Pressure Level Limit 1/4-inch microphone: 90dB~102Db;1/2-inch microphone: 100dB~115dB

Download information: