Compare to former generation product TM003, the new tapping machine selected a high torque stepper motor with verified mechanism of motor drive and hammer lifting, redesigned main control circuit and remote control, and significantly improved the operation reliability.
TM004 has five in line hardened stainless steel hammers. The weight of each hammer is 500g with diameter of 30mm and separated by 100mm to each other. The curvature radius of impact surface is 500mm. The hammers impact sequence is 1-3-5-2-4 with a falling height of 40mm and 100ms between each hammer impact. The time between impact and lifting of each hammer less than 80ms. Retractable feet of the tapping machine can be extended more than 100mm away from the hammers in work position and retracted for transportation. The feet with rubber base is height adjustable that can be used to adjust falling height of hammers when working on uneven or soft ground. A bubble level mounted on the top helps to adjust the horizontal posture of tapping machine.
TM004 will be automatically shut down by the overheat protection when the motor temperature exceeds 90ºC, and return to normal status until the temperature drops below 50ºC. Operation control can directly use front panel key, trigger, RS-232 and USB interface (the USB interface also can be used to update firmware of tapping machine). Supplied wireless remote control can operate even across the floor. The tapping machine supports the wide supply voltage (100~240VAC 50/60Hz) and the lithium battery (optional) is also available and can supply the machine for approx. 1 hour of continues operation.
TM004 is only weights 12.8kg with black PMMA shell to ensure easily transportation and packed in a strong and durable case for shipping.
Product Features
● Comply with GB/T 19889, GB/T 50121, ISO 140, ISO 717, ASTM E492, ASTM E1007
● Reliable mechanism of motor drive and hammer lifting with high torque stepper motor
● Height adjustable and retractable support feet with rubber base
● Operation control by front panel key, trigger, RS-232, USB and wireless remote control
● Motor Overheat protection
● Wide supply voltage: 100~240VAC 50/60Hz
● Lithium battery (optional)
● Packed in professional shipping case to ensure safety of transportation
● Simple structure and light weight for easily transportationComply with GB/T 19889, GB/T 50121, ISO 140, ISO 717, ASTM E492, ASTM E1007
● Reliable mechanism of motor drive and hammer lifting with high torque stepper motor
● Height adjustable and retractable support feet with rubber base
● Operation control by front panel key, trigger, RS-232, USB and wireless remote control
● Motor Overheat protection
● Wide supply voltage: 100~240VAC 50/60Hz
● Lithium battery (optional)
● Packed in professional shipping case to ensure safety of transportation
● Simple structure and light weight for easily transportation
Application
● Laboratory and field measurements of impact sound insulation of building floors
Specification | |
---|---|
Standards | GB/T 19889, GB/T 50121, ISO 140, ISO 717, ASTM E492, ASTM E1007 |
Hammers | Five in line made of harden stainless steel. Each hammer weight: 500±6g, diameter: 30±0.2mm, curvature radius of impact surface: 500±100mm. Distance of neighboring hammers: 100±3mm |
Tapping Frequency | Tapping interval time: 100±20ms (successive), 100±5ms (average). Time between impact and lifting of hammer less than 80ms. Sequence: 1-3-5-2-4 |
Falling Height 1 | 40mm (Hammers can fall to 4mm below the support feet level) |
Support Feet | 3 retractable feet with rubber base, +5mm height adjustment allowance, checking level with bubble level mounted on top |
Communication Interface | RS232 (DB9 connector, contains trigger port), USB (Type B) |
Remote Control 2 | LoRa(R) spread spectrum 433MHz wireless remote control, transmitting range 100m and cross two layer floors at least.(915MHz wireless remote control is optional, must consult before ordering.) |
Protection | Motor overheat protection, shut down when exceeds 90℃, return to normal status until drops below 50℃ |
Power Supply | 100~240VAC 50/60Hz mains, IEC Type C13 connector, optional lithium battery. Power consumption: running 30W, standby 1.6W |
Firmware Update | Update firmware via USB port |
Conditions | Temperature: -10℃~50℃. Humidity: 0%RH~90%RH |
Dimension 3 (mm) | W700mm x H316mm x D180mm |
Shipping Case Dimension (mm) | W895mm x H380mm x D250mm |
Weight | 12.9kg (tapping machine), 13.3kg (include remote control and battery, without shipping case). 25.4kg (include remote control, battery kit and shipping case). |
Option | |
Lithium Battery 4 | 4 x 18650 lithium batteries (capacity 2600mAh, embedded protection circuit) with supplied battery charger.Continuous operation time: 1h, standby time: 23h, charging time: approx. 5h. |
Control and Data Cable | Trigger control cable, RS-232 cable, USB cable, MiniUSB cable |
Note 1: | Falling height related to the support feet. The hammers can fall to 4mm below the feet level only when the feet are adjusted to the lowest position. |
Note 2: | Remote control transmitting range and floor across tested by 433MHz remote control in commercial and residential buildings of ordinary specifications. |
Note 3: | Support feet retracted. |
Note 4: | Tested by 2600mAh battery at 25℃. Depends on temperature, battery type and performance. |
Download information: